Building Pad Is Ready For Dirt Now

14 Tet 2020
67 239 Shikime

www.letsdig18.com/ for shirts and more

Komente
  • We are not a good night🌙 but we can see what we have

    Zander LongZander Long2 ditë më parë
  • Ok disclaimer, its Friday way past midnight ,had a whiskey or 3 or 5 , ok could have been more LOL. don't judge, I am a professional (drinker/operator or other way round depending on the time and what tomorrow brings.). Chris your a awesome operator in several different seats, I am as well , different seats but many overlapping, I'm in commercial construction been in everything from skid steer to tower crane. It just came to me though I think your channel name may be slightly wrong or could / should be changing depending on the gig. Maybe starting a new channel depending on the gig, I was thinking of Let'sbe,clear ( I'm sure a graphic artist could make that into a track hoe shape) or something along those lines. I think you do 75% or better clearing land and prepping sites than digging, but hey whatever pays the bills good for you. It's the American dream work your ass off to make your self better, rock on, I got no complaints, love to see good talent at work. I see complete dumbasses on a daily basis and wonder how they drive themselves to the site day. Just ask about this weeks dumbass moment,\Then I think these are the same people that cant do unproductive but manage to get into politics for life and are the same compete dumbasses that you don't know how they managed to get to work without killing themselves or anyone else on the road implementing new laws for the greater good of the people.

    Travis WatsonTravis Watson2 ditë më parë
  • I drove by a site yesterday and saw a Volvo excavator and haul truck parked by the road. I immediately looked to see if he had the LD18 thumb. To my disappointment, he did not. I’m a 28yr old truck driver, but these videos make me want to become a heavy equipment operator.

    Wade LevanWade Levan3 ditë më parë
  • That skid steer grading etc - poetry in motion Chris - and all the excavator work too. :)

    ChrisB257ChrisB2574 ditë më parë
  • Has John ever been interviewed. He's the real deal. Chris, thank you. Eaglegards from Texas...

    Political Boffin, PhDPolitical Boffin, PhD4 ditë më parë
  • Haven’t been over here for some time. where is Tim?

    methusla 76methusla 764 ditë më parë
  • Hey Chris do you do special orders for sweaters?

    The gaming channelThe gaming channel4 ditë më parë
  • Have you ever suffered from carpal tunnel syndrome using those joysticks everyday

    Laurel HerbertLaurel Herbert4 ditë më parë
  • you should use the 3,4,5, rule. it might be easier and more accurate to get the corners square

    Stephen CiceroStephen Cicero4 ditë më parë
  • i didnt know how to do the diagonal back in my youth when I built my garage, and its 3" out of square for a 22' garage. Ya...

    Greg BickalGreg Bickal4 ditë më parë
  • Pay attention to your math teacher kids you may actually need it some day.👩🏼‍🏫

    Dave LoderhoseDave Loderhose4 ditë më parë
  • Great. Well done.

    Emad Eldin HessainEmad Eldin Hessain4 ditë më parë
  • Another great video Chris, Man you and John and yawls family y’all stay safe and keep the videos coming brother, I really enjoy watching your videos every day

    timmy friersontimmy frierson4 ditë më parë
  • So I went back and watched a video from when you first got the bucket and the thumb didn't make as much noise. From the camera on the stick the other day it looked like a fair amount of slop on the top of the thumb ram. Maybe needs some shims before the pin or ram top eye has to be replaced. Maybe it is supposed to be like that.

    Eric MacEric Mac4 ditë më parë
  • If you get a chance check out diamond mowers. I'm a welder for them and we make mowers that will shred trees up in seconds. No more hauling it away or burning it. It will save you tons of time and money. You do great work tho by the way keep it up man!

    Andrew WiseAndrew Wise4 ditë më parë
  • 👍👍👍👍

    Michał ŚleziakMichał Śleziak4 ditë më parë
  • Why do you put fabric under some driveways and not others

    Mark ReedyMark Reedy4 ditë më parë
    • Probably Customer makes the call based on Cost

      Troy RogersTroy Rogers4 ditë më parë
  • You should design a sifting bucket

    Jarrod SpencerJarrod Spencer4 ditë më parë
  • 👍 👍

    Helen HelpsHelen Helps5 ditë më parë
  • The person wanting this. Must be impressed by how fast the site is getting done. Like snap it is done.

    assassinlexxassassinlexx5 ditë më parë
    • When ya build these it’s always the interior finishing that takes forever. Just finished a 40x60 shop this spring. Spray foam insulation and then a steel interior finish made things go very quickly indeed. All steel framed as well.. we will really see how well it is completed when I’m in there at minus 40 with a wind blowing. That lets you know how tight and insulated it is. My other shop turned cave is 30 x 40. It’s nice too but was stick built with 14 foot walls and fibreglass pink insulation. 2x6 walls but it’s not a really warm shop after about minus 30. That’s why I did spray foam insulation this time. It helped when I put a big gas fireplace in the lounging area, but there’s a healthy heating bill in the winter!!! In floor heat can’t keep up. You learn more every time you do something. Definitely. I bet this will be a nice shop. Wonder how Chris is doing with the enclosed portion of his new shop. I really like that shop!!! I like the open storage, but our winters here are too harsh for some of the vehicles I have and plan to get, to just store them outside. Building a 1967 Chevy short box. Cab and the front end are going in for paint. Finally ordered a new recreation of a stepside box from 67. Was torn between fleetside and stepside. I already have a 70 fleetside long box, sooooo. This tome I took the 454 out and put a 350 fuel injected crate motor. It’s only about 325 hp and 375 lb ft of torque hooked up to a 4L60.. The 70 has a 502 with 6 speed auto. About 575 hp and 600+ lb ft of torque (not dyno’d) it just sits and spins anyways,,,,, hahaha!! Next,,,,,, 68 Mustang resto mod. I have the powertrain from my other 69 Bronco that was broadsided this spring. It will be a very nice cruiser when done. Still planning that one out! Gotta do something in retirement.

      69 Bronco Guy again!!69 Bronco Guy again!!4 ditë më parë
  • Yep, I use a similar "screwdriver trick". There's an app you get on your phone that'll calculate the diagonal measurement.

    JC Mathis IIIJC Mathis III5 ditë më parë
  • How do we know that top soil is fully removed? Is there a definitative depth like 4" from the surface?🤔

    Iril IralIril Iral5 ditë më parë
    • Color changes

      assassinlexxassassinlexx5 ditë më parë
  • You sure changed the looks of that place ,great job

    Jimmy StrainJimmy Strain5 ditë më parë
  • Do you use the 3,4,5 method to square your footings?

    G.V. EXCAVATION LLCG.V. EXCAVATION LLC5 ditë më parë
    • Construction Master Pro will give you the exact measurement....no need for 3,4,5, and 6,8,10 is even more accurate on larger areas if you don't have the calculator.....

      Southern Homestead TransformationSouthern Homestead Transformation5 ditë më parë
  • You done and broke the new side boards

    Tim ClevingerTim Clevinger5 ditë më parë
  • good video

    ramtuff2007ramtuff20075 ditë më parë
  • You may have covered this in a previous video but who does your estimations and keeps the work coming in?

    Lucky MonkeyLucky Monkey5 ditë më parë
  • This is my favorite letsdig video to watch. A little bit of clearing, a little bit of road building and leveling a pad. He makes it look easy but I promise it is not as easy as he makes it look. I drove by his parents house the other day. It looks like somebody on a tractor and a box blade tried to level it with a flat tire on the back. He needs to get over there and hook his parents up with some smooth gravel....

    Lucas RenfroeLucas Renfroe5 ditë më parë
  • Chris, you are a one man wrecking crew. You get more done in a day by yourself then a full crew does in a week. Great job!

    Daniel TDaniel T5 ditë më parë
  • 👍👍

    Scruffy 61Scruffy 615 ditë më parë
  • 3 minutes and 15 seconds to spread that material with the skid steer! I was super impressed with how quickly he got that graded!

    Aaron WatersAaron Waters5 ditë më parë
  • I’m glad you knew what you was doing when you was squatting up the pad

    Todd RobertsTodd Roberts5 ditë më parë
  • Curious, the immediate previous video, you were snapping trees like toothpicks. Is there a scale of what kind of power you have with the bucket and thumb? John

    ZebrailsZebrails5 ditë më parë
  • Did I miss something, I miss seeing Tim. Where did he go?

    j rehtilj rehtil5 ditë më parë
    • Got another job several weeks ago.

      Baby CatcherBaby Catcher5 ditë më parë
  • I know that flight simulators are popular. Does anyone know if a realistic excavator simulator exists?

    Scott BrennerScott Brenner5 ditë më parë
  • Get you a Domor grader box and save yourself a lot of time and the quality of the finished product is better. Best skid steer attachment I ever bought.

    Russell MetcalfRussell Metcalf5 ditë më parë
  • Remarkable skills on the equipment. Now crank up the editing skills do some more collaborating and grow this page. Hopefully you’re generating some decent revenue. Great channel.

    Rob ORob O5 ditë më parë
  • Nice ,clean ,quick work ! 👍🏻

    Full Tilt GradingFull Tilt Grading5 ditë më parë
  • The 160 has a fast spin rate. Most machines aren't half as fast.

    Ernest SilvaErnest Silva5 ditë më parë
    • Volvo. Period.

      Marc René YvonMarc René Yvon5 ditë më parë
  • How did your new side boards get busted already?

    Cody LakeCody Lake5 ditë më parë
    • He has not put them on yet...

      Southern Homestead TransformationSouthern Homestead Transformation5 ditë më parë
  • John does a good job spreading backwards. I have seen guys who couldn’t spread going forwards, much less spreading backwards .

    Michael PageMichael Page5 ditë më parë
    • 👍

      Mac's TravelsMac's Travels4 ditë më parë
    • Real deal! Eaglegards...

      Political Boffin, PhDPolitical Boffin, PhD4 ditë më parë
    • He sure does 👍🏻

      Construction TrucksConstruction Trucks5 ditë më parë
  • I just started watching these videos 3 days ago I have no idea why but I can't stop. you sir are a true pro on the use of excavation equipment.

    Jeremy HudginsJeremy Hudgins5 ditë më parë
  • Chris, Better get some Gorilla Glue on that sideboard or it won't last the week !

    DENNIS RYANDENNIS RYAN5 ditë më parë
  • Gettin' her knocked out now !! Looking good Chris.... Man, that skid steer is nice, said it before, they almost sound electric ! , Man years ago I remember the first skid steer i ran had a "T" steer, and 2 foot pedals , up/down - an bucket an wheels,...lololol...But it got the job done !! lolol... The New ones today are just awesome little machines !! Great as alway Chris !! Thanks for taking your time and sharing with us all everyday !! Have a Great Evening....On to the Next !!

    Keith DunlapKeith Dunlap5 ditë më parë
    • Agree with you ! That "lil' " machjne is impressive. So is the Yanmar "small" digger. Awesome machines. So versatile pieces of engineering !

      Marc René YvonMarc René Yvon5 ditë më parë
  • what is your maintenance time on the your equipment. Like to see a video of that if possible. love the videos

    KCcrazyideaKCcrazyidea5 ditë më parë
    • @assassinlexx I will look for them.

      KCcrazyideaKCcrazyidea4 ditë më parë
    • He has done videos of doing maintenance on his equipment. Oil changes, filters changes, hoses etc.

      assassinlexxassassinlexx5 ditë më parë
    • I believe he does basic maintenance- greasing all joints, daily. Yes, daily. Best way to ensure long time reliability. As an old Fram ad said "Pay me now, or pay me later." regarding regular oil and filter change. Still true to this day. No secret in there !

      Marc René YvonMarc René Yvon5 ditë më parë
  • I swear 18 your a one man show.I mean that with all sencerity Damn.

    William DWilliam D5 ditë më parë
  • Looking Great with this New Building Lot. A 50 x 50 Building on Site will be a Nice Workshop. 👍

    Ken S.Ken S.5 ditë më parë
  • whos the manufacturer of the thumb on that there 160 ?

    k2marinek2marine5 ditë më parë
  • You just painted the new side boards like a month and half ago, is the paint even dry yet?

    Tim ParksTim Parks5 ditë më parë
    • 😂😂

      Wade LevanWade Levan3 ditë më parë
    • Yea right, lmaoooo

      timmy friersontimmy frierson4 ditë më parë
    • You got a point,,,,,,, he definitely made sure there was enough paint on those,,,,, haha!

      69 Bronco Guy again!!69 Bronco Guy again!!4 ditë më parë
    • I think the new boards will be a Christmas present for the truck.

      Dewit Wright formerly Silent EpsilonDewit Wright formerly Silent Epsilon4 ditë më parë
    • I was just about to ask about sideboards. People on here get kinda testy if you repeat at a comment. Not talking about Chris that man is skilled.

      Gary WrightGary Wright5 ditë më parë
  • Seems like you've been waiting on that 4-way bucket for ages?

    jcadult101jcadult1015 ditë më parë
    • That’s John’s skid steer it has a four in one bucket where that that was not Chris skid steer

      timmy friersontimmy frierson4 ditë më parë
  • at the beginning of this vid that transformation from dumped stone to smoothed and leveled path using the skid was pretty damn slick man.

    MrEggulaMrEggula5 ditë më parë
    • Happend so fast.

      Mark Carpenter JrMark Carpenter Jr4 ditë më parë
  • I just got a tl10 and I love it

    Brian YoderBrian Yoder5 ditë më parë
  • Good job on the video chris

    Junior RainesJunior Raines5 ditë më parë
  • Ya didn't put the new boards on yet ?

    MrFrankturbo1MrFrankturbo15 ditë më parë
  • Chris I worked with a lot of dam great operators and truck drivers, and they took the time to show me how to run the equipment and all kinds of stuff, but I can tell you , you are bad ass and John is awesome truck driver

    Donald TrabeauxDonald Trabeaux5 ditë më parë
  • Do you enjoy the smaller jobs like this where you are in and out in a few days?

    KOKO5 ditë më parë
  • Great video, as usual. Have you tried any wider angle views from inside? It would be interesting to see both your hands while you work.

    MarioMario5 ditë më parë
  • Hey Chris wonder have you work for while with dirt perfect? But Logger wade are Weiner!

    Steven PetersSteven Peters5 ditë më parë
  • Funny how one job way too much dirt and the next not enough! Too bad you can not set up your own dirt lot. Make money to take in, make money to haul out!

    Kyle GreerKyle Greer5 ditë më parë
  • I'll bet those neighbors were just thrilled at the waking sounds of equipment running not to mention the screaming of that incestant backup alarm on John's dump truck... Chris when you back up with the skidsteer and drag do you feather the bucket or place the weight of the machine on it?

    Johnny HollandJohnny Holland5 ditë më parë
  • That'll be nice Workshop 50 x 50 can't go wrong with that. 👍👍😀🍁

    I Paddle My Own CanoeI Paddle My Own Canoe5 ditë më parë
  • Does Takeuchi have a forest mulcher head?

    Jiolsen CourtenayJiolsen Courtenay5 ditë më parë
  • Operated a Takeuchi several months ago and it was smooth. They are nice machines.

    Patriot KevinPatriot Kevin5 ditë më parë
  • Ya that's what she said!

    Greg BowlesGreg Bowles5 ditë më parë
  • Enjoyed this video. Nice little pad and shop gonna sit in those trees.

    Craig WavraCraig Wavra5 ditë më parë
  • You must be working Uncle John mighty hard ? He was moving real slow getting out of the Dump Truck .

    Eddie Morton Tap ManEddie Morton Tap Man5 ditë më parë
  • I watched another channel earlier today and they did what I've seen you complain about. They put bell and spigot pipe in a trench with the bell end pointing down the hill over the spigot end. I commented a link of a video by a manufacturer saying to not do that.

    Kevin CoopKevin Coop5 ditë më parë
    • jcadult101 I know but, I don't name names.

      Kevin CoopKevin Coop5 ditë më parë
    • Chris knows DirtPerfect

      jcadult101jcadult1015 ditë më parë
  • Keep on keeping on Chris

    gregyboy1231gregyboy12315 ditë më parë
  • Love to watch some one that knows how to back blade, use the bucket like dozer. Very smooth.

    Bruce LarsonBruce Larson5 ditë më parë
  • Another awesome job... just curious..did you ever try using batter boards to square your pads??

    john colasantojohn colasanto5 ditë më parë
  • We are always complimenting Chris for his skills, so I'm going to give John a big up for judging tail gating that last load of stone so perfectly. The last of it spilled out right at the end of the drive, so kudos to John. Guins Excavating and Chris himself like to use lowish hours good condition equipment, and they like to look after it. To underline the cost benefit of that, Mr Mike Simon Dirt Perfect has two excavators broken down on the job right now. His Volvo is not so old and I don't know what the problem is, but his Deere 120 is getting like grandpa's axe. It just came out of the shop after a major overhaul, and now it has a broken drive motor. He has the aggravation of moving the excavator back to the shop and leaving the job half done, which is not a good look.

    Trevor DennisTrevor Dennis5 ditë më parë
    • I’ll agree with RAH Capital to a degree. If you are going to own older equipment it needs to look good and be in tip-top- shape. In other words a good paint job or a wrap if you can’t afford that. Non leaking hydraulics and motors as well as starts and runs every time. We all know, every piece of equipment will have problems at some point, however those problems will be much less if properly maintained/serviced and cleaned. With that said it has been my experience that customers will hire out the company that operates the newer and/or better looking equipment. They feel that they don’t have to worry about that equipment slowing the pace of their job getting done due to break downs etc.. I know owning good equipment is only 1/2 the battle, the operator needs to know what he/she is doing as well. So you add those two combinations together and I’ll bet the better looking/running equipment with a good operator will get the job every time.

      Philliph WhirleyPhilliph Whirley5 ditë më parë
    • how many businesses have you ever owned and operated? how many millions of dollars of equipment have you maintained? some people like to own their equipment which means older, some people like to operate in debt their whole life(new shiny equipment). nobody cares if it "looks" good to YOU. one thing for sure, when you own it and business dries up, you arent stressing. so if OWNING older equipment gives you peace of mind thats a good thing. go badmouth people somewhere else.

      RAH CapitalRAH Capital5 ditë më parë
    • So, I wouldn't say that old equipment is necessarily bad, but it does require some attention. Thanks to Trevor I went and watched this dirt perfect guy... That ole Deere has more issues then just a drive motor... anyway, I can watch chris work all day, and learn something from it, some of these other hoe jockeys that make vidjeoes... irritate me to watch em "work"

      northman loggingnorthman logging5 ditë më parë
    • @Matt Bolton he talks a good game and tries to do it all master of none

      Jon SchneckJon Schneck5 ditë më parë
    • Your point is incoherent

      Mark StoughMark Stough5 ditë më parë
  • Like the video and do you talk you and uncle some times , he look cracky .

    leo lleo l5 ditë më parë
  • Man I tell ya,having to grade with a straight bucket after spending years with a 4 in 1 is a pain in the butt. You can get it done but life is just so much easier with a 4 in 1

    Dustin PrydeDustin Pryde5 ditë më parë
  • I just found out who is putting all the pipe bells in backwards. Check out the latest Dirtperfect video. lol

    PawpawPawpaw5 ditë më parë
    • He sure got an earful too!

      jcadult101jcadult1015 ditë më parë
    • 🤣😆

      Lee HarrisLee Harris5 ditë më parë
  • Your tracks on your skidsteer looks lose in the video.

    MrStacy G.MrStacy G.5 ditë më parë
  • Enjoyed this video bro. Keep safe up your way

    Ken AllenKen Allen5 ditë më parë
  • Do you have a tooth bar for your compact track loader?

    Darryl KenesDarryl Kenes5 ditë më parë
    • They have a 4-1 bucket and it has teeth.

      Brian GardinerBrian Gardiner5 ditë më parë
  • I did the math. It's 74.95 feet not 74 feet 9.5 inches.

    D SD S5 ditë më parë
    • Technically it's 74' 11 7/16"..... :-).....but for grading or hand grenades , close enough ;-)

      Southern Homestead TransformationSouthern Homestead Transformation5 ditë më parë
    • Close enough for grading lol

      letsdig18letsdig185 ditë më parë
  • By curiosity, is there any particular reason you call it dirt and not soil ?

    Serge KentSerge Kent5 ditë më parë
    • "Some good topsoil down here"?

      jcadult101jcadult1015 ditë më parë
  • How many hours on that skid steer now? Thinking that’s the size I want

    Justin HendersonJustin Henderson5 ditë më parë
  • What type of material are you using at the beginning of the video?

    Dakota YoungDakota Young5 ditë më parë
    • I’m interested myself.

      David BrethDavid Breth4 ditë më parë
  • Check those diagonals, had to find out the hard way and build a 4 bay garage that the slab was poured 6” out of square. Sides were within 1/8” though😂

    allan adamallan adam5 ditë më parë
  • Great job Chris! 👏😃 The noises of the machines make me tired at 11:58 p.m. in Germany. 😴😉

    Gisela P.Gisela P.5 ditë më parë
    • @Kt Bee I understand that. I feel the same very often. 😄😜

      Gisela P.Gisela P.5 ditë më parë
    • Me too in the U.K. But I find it fascinating, so I fight past being sleepy and then I find it's around 5am!!! 😳🤪

      Kt BeeKt Bee5 ditë më parë
  • Hair out of square construction...we do it right because we do it twice...📐✏️😂

    Dale LewisDale Lewis5 ditë më parë
  • Fast work.

    George TuckerGeorge Tucker5 ditë më parë
  • NICE JOB WELL DONE LIKE ALWAYS.

    josian rodriguezjosian rodriguez5 ditë më parë
  • Do you proof roller for soft spots before you place fill on it

    Gordon ShearstonGordon Shearston5 ditë më parë
  • Nice clean professional job as always. Bravo, excellent work as always.

    J PennyJ Penny5 ditë më parë
  • What kind of material is that on the drive? Some type of crushed concrete / fill? Thanks!

    upupaepopsupupaepops5 ditë më parë
    • @Blazer02LS The best stuff for compacting solid.

      Marc René YvonMarc René Yvon5 ditë më parë
    • Looks like the stuff we call crusher run here. Basically pulverized stone from 1" down to stone dust.

      Blazer02LSBlazer02LS5 ditë më parë
  • Enjoying the show

    Kevin WilliamsKevin Williams5 ditë më parë
  • Looks awesome.nice job and the road going into it look great too. The pad look nicely done😀good job Chris as a 1 man company.your keeping on top of everything 😀😁.keep Up the good work man.👍👍👍

    Marc WohlmayerMarc Wohlmayer5 ditë më parë
    • @Samuel Lim ah ok his uncle. I was wondering who he was cuz i seen him a few times in the videos.

      Marc WohlmayerMarc Wohlmayer5 ditë më parë
    • ? He works the jobs with Uncle John. Who was there today.

      Samuel LimSamuel Lim5 ditë më parë
  • Bravoo

    eno excavator pc 200eno excavator pc 2005 ditë më parë
  • I'm early for once 🎉👏🏼🤣🤣🤣🤣

    Megan MMegan M5 ditë më parë
  • I've been wondering where those new hungry boards got to. Had to resist the urge to come around and bolt the splits back together on the ones on the truck 😃. At least the paint job should be good and dry.

    xj9oxxj9ox5 ditë më parë
    • As thick as Chris was putting on the paint, I'll bet they are still drying!

      Brian GardnerBrian Gardner5 ditë më parë
  • Damn beautiful machine with the lights on, and the morning sun shining on it, now lets get her dirty!!!!!!!!

    Roger HackerRoger Hacker5 ditë më parë
  • Around here 1 dollar a foot for a 2x4. Might want to hold off on the build. Unless lumber lower where your at. .

    John ScottJohn Scott5 ditë më parë
    • @Marc René Yvon Funny how they weren't so high just before the shutdown, but it "must be trump". Fckn zealot.

      jcadult101jcadult1015 ditë më parë
    • You American friends may thank ONE man for that: Donald J. Trump for imposing stupid tariffs over and over again on our Canadian forest products, we, your historicaly largest suppliers of building supplies. Same with steel and aluminum raw products. He made terrible decisions hurting YOUR manufacturers of finished products. Get real, people, vote this stupid man out ! YOUR jobs are on the line !!

      Marc René YvonMarc René Yvon5 ditë më parë
    • It is Fcked all over! Waiting for winter to set in for the building to slowdown to hopefully start my shed

      jcadult101jcadult1015 ditë më parë
  • Looks like you uncle is not feeling it .constantly doing your thing😎😎👍👍

    Tom SwindlerTom Swindler5 ditë më parë
  • Other than sheets of plastic, have you ever laid a road using GeoGrid?

    Alan SmithAlan Smith5 ditë më parë
    • @Alan Smith That would be my guess. Not saying it doesn't have it's place like that slope of theirs, but compared to straight road fabric,.. $$$

      jcadult101jcadult1015 ditë më parë
    • @jcadult101 Probably 'Sponsored' (donated) by them!?

      Alan SmithAlan Smith5 ditë më parë
    • I'm guessing that colorado homestead channel didn't have to actually pay for it.

      jcadult101jcadult1015 ditë më parë
  • Your grader must be feeling usurped by the skid steers - poor old girl hasn't had an outing in a while.

    GARGLER42GARGLER425 ditë më parë
    • @GARGLER42 haha

      Austin GibsonAustin Gibson4 ditë më parë
    • @letsdig18 Oh dear - I hope you have it well insured...;-)

      GARGLER42GARGLER425 ditë më parë
    • Justin has been using it on a job lol

      letsdig18letsdig185 ditë më parë
  • Here

    MillerBugMillerBug5 ditë më parë
    • @letsdig18 i am long time watcher i have enjoyed ur videos it has tough me alot about geting into that type of work and i think i would need alot more than just a small cash flow atm

      MillerBugMillerBug5 ditë më parë
ALworld