Yanmar Voi55 Vs Kubota KX057 Mini Excavator

1 Kor 2020
98 996 Shikime

yanmar vs Kubota mini

  • Can you compare with yanmar sv 60 ?

    chêne splitchêne split2 muaj më parë
  • I'll take the counter weight and the angle blade for the better mini-ex.

    Maine ManMaine Man2 muaj më parë
  • With the added counterweight on the yanmar would it be a tie?

    Rich HaislipRich Haislip3 muaj më parë
  • Where is a Yanmar from ?? kubota is Japan ?? Kubota is going to start making big tractors in Winnipeg Canada in the old Versatile plant .. The one thing about the Japanese they make equipment where they sell it .. Not like GM making cars in Mexico and China . GM cam go bankrupt and go to hell

    George DavidsonGeorge Davidson3 muaj më parë
  • I laughed so hard at the log weight. Lol they are always heavier than ya think.

    Adam ReddellAdam Reddell3 muaj më parë
  • Wat's the cost difference? Kubota and Deere both price their machines higher I guess because they can. I'm not an excavator though. I have an old John Deere 430 garden tractor from 1984 with the 3 cylinder Yanmar in it that I restored.. The other day I cut about 6 trees out of my tree line and I wanted the mess all in one place so that little mule drug maybe 10" trees up to my burn pile with ease. Probable 1500 lbs. I need to get a set of tongs, the trunk end drug in the mud the whole way but it chugged right along. About 24 more trees to go!

    John PyleJohn Pyle3 muaj më parë
  • That was a lot of pressure on the idlers when you were carrying the log offf to the side. lol

    yorty2112yorty21123 muaj më parë
  • Bladet gör stor skillnad.

    The new Making it HappenThe new Making it Happen3 muaj më parë
  • Very interesting my friend. I like yours better because of the zero turning circle.

    O'Donnell's Aussie HomesteadO'Donnell's Aussie Homestead3 muaj më parë
  • I thought Log was getting heavier. but the Log was heavy.

    David BrickeyDavid Brickey3 muaj më parë
  • Ihr vergleicht einen kurz Heck Bagger mit einem normalen Heck Bagger 🤦‍♂️ dann nehmt den U48 der hat auch ein kurzes Heck

    Toxic-_- MarlonToxic-_- Marlon3 muaj më parë
  • Can you imagine how much pressure is on that pin where the boom connects to the machine! That’s got to be a tough one

    john guinnjohn guinn3 muaj më parë
  • Why don’t you buy a cat 305

    Max SchlumMax Schlum3 muaj më parë
  • How many hours you have on your yanmar?

    Hartle627Hartle6273 muaj më parë
  • Both are good machines. That tree is a lot of weight for either machine.

    Dennis LeadbetterDennis Leadbetter3 muaj më parë
  • what does each machine weigh?

    k. royk. roy3 muaj më parë
  • 2:53 Drop the mic 😂

    ikillbugsikillbugs3 muaj më parë
  • Which one uses the most fuel, & has the greater maintenance expense?

    Erman CroneyErman Croney3 muaj më parë
  • Cheaper Pond update?

    Brent DowlandBrent Dowland3 muaj më parë
  • “What back to your childhood days as in who’s has the biggest or in this case the best lol but all in the fun of it.👍

    John CampbellJohn Campbell3 muaj më parë
    • swampratt36 🤪😂😂👍

      John CampbellJohn Campbell3 muaj më parë
    • 🤣 atleast they weren't sword fighting 😳👍

      swampratt36swampratt363 muaj më parë
  • You guys need to go have some fun away from work😆😜

    P AugieP Augie3 muaj më parë
  • Interesting, fun test, Chris. I've got about a hundred hours on my nephew's KX057-4. I think I like the thumb and wider track on the Yanmar better, however, from an ease of operation for a low time operator, the counterweight on the Kubota is probably safer. Hey, you drive a Ford and I drive a Dodge. Keep up the good work, son. Your video's are the highlight of my day........

    Carl McLellandCarl McLelland3 muaj më parë
  • Come on get to the truly important matter.... How many cup holders?

    wcresponderwcresponder3 muaj më parë
  • Their both tuff little machines.

    Jewelry TymeJewelry Tyme3 muaj më parë
  • good video

    ramtuff2007ramtuff20073 muaj më parë
  • Everything but the Price difference! so how much more is the Kubota?

    MRKUEMRKUE3 muaj më parë
  • You can buy a extra counterweight for the yanmar.🤔

    thequattro20vthequattro20v3 muaj më parë
  • At the end of the day it’s personal preference, finances,and type of work your doing with the machine you buy. Look after your machine and it will look after you.

    SatanSatan3 muaj më parë
  • Chris, would it be possible to put a larger, heavier counter weight on your mini? Is it feasible for longevity? I would think it would help make it more stable when you have to reach out far and pick something up or dig.

    Bob FerrantiBob Ferranti3 muaj më parë
  • Don't some Kubota's have hydraulics that push the tracks apart to widen the track width?

    iowawrenchiowawrench3 muaj më parë
  • Mini excavator boxing match next?

    Full SalvoFull Salvo3 muaj më parë
  • 👍

    Michał ŚleziakMichał Śleziak3 muaj më parë
  • Both are nice lil machines...

    kendal kennykendal kenny3 muaj më parë
  • Volvo ecr58d seems to have beefier boom tilt pivot than Kubota.

    Juha TuomalaJuha Tuomala3 muaj më parë
  • Both good machines but theres a reason why Kubota is known for making the best minis.

    Forrest AForrest A3 muaj më parë
  • Have you ever tried a bobcat excavator?

    discrete dieseldiscrete diesel3 muaj më parë
  • Still just a couple kids playing in the sandbox. The toys have just gotten more expensive 😂

    Benjamin LawrenceBenjamin Lawrence3 muaj më parë
  • And the winner is: KUBOTA!!!!!!! No doubt. ;-)

    Benjamin BeytekinBenjamin Beytekin3 muaj më parë
  • Price comparison? What did each cost new?

    David CurtisDavid Curtis3 muaj më parë
  • I would bet that the yanmar will out last an be less maintenance than the kubota

    Frank HebertFrank Hebert3 muaj më parë
  • Chris didn't you already work out that Takeuchi 260 will out grunt Kubota.Presume it would devour the Yanmar.

    Mike McAuleyMike McAuley3 muaj më parë
  • The Kubota has booty!

    Mike HowardMike Howard3 muaj më parë
  • Amazed at the power of these small excavators! That log is massive!

    MR-MBMR-MB3 muaj më parë
  • Looks like your track is a little loose , I’m sure you know throwing a track is super fun , especially in the mud 🤣

    Matt BMatt B3 muaj më parë
  • Those are impressive machines. Tiny excavators lifting almost 2 tonnes while reaching out. Bet the hydraulic oil got really hot....

    Odin-Eliott OdinsonOdin-Eliott Odinson3 muaj më parë
  • Do you got that truck channel to?

    I HI H3 muaj më parë
  • I'm honestly impressed they were moving that log around.

    MrWenckeMrWencke3 muaj më parë
  • 👍👍👍

    Ragsdale Creek WorkshopRagsdale Creek Workshop3 muaj më parë
  • Both excavators are pretty inexpensive for the higher end class mini excavators.

    Mike BullockMike Bullock3 muaj më parë
  • KX040 is as big as we can get away with towing behind a 1-ton in my parts, so it can be tough to justify not jumping to an 8 or even 10 ton machine if it has to go behind semi anyway.

    Joe PrinceJoe Prince3 muaj më parë
    • @Joe Prince ah. I see.

      WPOG84WPOG84Muaj më parë
    • @WPOG84 Washington.

      Joe PrinceJoe PrinceMuaj më parë
    • @Joe Prince man. That sucks. Which state?

      WPOG84WPOG84Muaj më parë
    • @WPOG84 Yes. My state charges annual registration by vehicle weight. The pickups are not licensed for a high enough gross weight for the pipe rack, saddle rank, tool boxes, plus the excavator and trailer to haul an 057 without risking fines. Buying additional tonnage would push into CDL territory.

      Joe PrinceJoe PrinceMuaj më parë
    • Is that some local law your referring to? A one ton can easily pull a heavier machine than 4.5 ton

      WPOG84WPOG84Muaj më parë
  • Both channels , Let’sdig18 and Andrew Camarata both have yanmar minis and full size hitachi and somehow I ended up with a yanmar mini and a full-size hitachi ... hmmm

    C gC g3 muaj më parë
  • I almost got a yanmar vio35 but I’ve watched this channel along time and I decided to get copy you the bigger vio55 and I’m glad I did

    C gC g3 muaj më parë
    • I would buy an SV60.

      FPVForLifeFPVForLife4 ditë më parë
    • Makes a world of difference in what you can do.

      MrWenckeMrWencke3 muaj më parë
  • The kubota has a better thumb I think. But the Yammer for her size in all showed she can go nose to nose with any machine even with a big oak stick .

    assassinlexxassassinlexx3 muaj më parë
  • Amazing work i like this🥰

    Vannak RC OfficialVannak RC Official3 muaj më parë
  • And Terex makes the best. A huge thing is having an actual suspension and not just flat rollers. :)

    jacktherippedjacktheripped3 muaj më parë
  • What is the difference in the price between the yanmar and the kabota

    joe e. fuytinckjoe e. fuytinck3 muaj më parë
  • Do I need to do to you what my mom did to my brother and his best friend one day? One was digging the sewer line from the house to the septic tank and the other was digging field (lateral) lines and they were giving it hell! Each trying to out do the other. Mom walks out with a tape measure, yells at them, whip’em out, boys, lets just see who’s is bigger.

    Jeff ToombsJeff Toombs3 muaj më parë
    • Who one

      Todd ReynoldsTodd Reynolds3 muaj më parë
    • Jeff Toombs Mothers can get away with comments like that! Lolol

      Baby CatcherBaby Catcher3 muaj më parë
  • If you were buying a new mini today in the 55 to 60 class machine and money wasn't an issue what machine would you get and which machine do you think would be the best bang for the buck? Thanks!

    Clyde AcorClyde Acor3 muaj më parë
  • Are counterweight weights on these machines an item that you could order larger with the machine? Or add a larger counterweight later on? Or is the machine only spec'd to run with one size counterweight?

    Wildey's HereWildey's Here3 muaj më parë
  • I would still take the yanmar

    wheelitzr2wheelitzr23 muaj më parë
  • Clearly Kubota wins brute strength but I would think equally important would be mobility, reliability, maintenance cost, and factory warranty.

    autiger621autiger6213 muaj më parë
  • Awesome video Chris that is a big old red oak

    Junior RainesJunior Raines3 muaj më parë
  • Price comparison would be great as well

    Micheal A EdwardsMicheal A Edwards3 muaj më parë
  • as long as you put the blade down where your lifting, you'll be good with either machine

    Nancy JohnsonNancy Johnson3 muaj më parë
  • I love my KX040, but after watching you with Yanmar's, they would be my second choice,

    Hi ShaggyHi Shaggy3 muaj më parë
  • Kubota is better !

    Georgy AndreevGeorgy Andreev3 muaj më parë
  • can you give us an update on your oak tree? have any free dirt laying around?

    RAH CapitalRAH Capital3 muaj më parë
  • Like the Kubota simply because the hydraulic whine on the Yanmar is so irritating.

    ArthurDentZaphodBeebArthurDentZaphodBeeb3 muaj më parë
  • Why we boys have to push the limits? Lol

    Justin MillsJustin Mills3 muaj më parë
  • Heh, true "field" testimonials lol.

    TheBurnsStuffTheBurnsStuff3 muaj më parë
  • That log weighs as much as many vehicles. So a little mini excavator can move cars! LOL

    Mark CongerMark Conger3 muaj më parë
  • That's a great way to check the hoses for defects 🤔And have a bunch of fun 👍💪. Stay safe 😷 🇨🇦 Craig

    Craig MacDonaldCraig MacDonald3 muaj më parë
  • The kubota has a little bit more junk in the trunk.

    Brian WalterBrian Walter3 muaj më parë
  • I just watched the moving of your oak tree video. It’s been a couple years now. How’s it doin in the new home location?

    Tim WarrinerTim Warriner3 muaj më parë
    • letsdig18 picture? (at your convenience tho). I am a tree lover...

      Tim WarrinerTim Warriner3 muaj më parë
    • its growing well

      letsdig18letsdig183 muaj më parë
  • I've got a kubota kx040 and I haven't found anything in its class size to beat it yet. I used a 57 once, and it was half again what my 40 is.

    Randall WescoatRandall Wescoat3 muaj më parë
  • I just watched your video moving your childhood tree. Is the tree still alive?

    FTWTexas StephensFTWTexas Stephens3 muaj më parë
    • its doing well

      letsdig18letsdig183 muaj më parë
  • Finally...proof that size doesn't matter. It's the way you use that counts.

    TwunTwun3 muaj më parë
  • Interesting to watch but I'm not sure if this proves anything. They both are probably good machines.

    Tmcn1899Tmcn18993 muaj më parë
  • Chris might be pretty good at his job but he doesn't know jack about fish stories. Should have been saying the log was at least 6,000 pounds - and then never weighed it.

    ljfingerljfinger3 muaj më parë
  • I would love to see a walk around and tour of your F550 and see what you like and don't about the truck and would you get another F550 if the opportunity arises

    Wyatt CarsonWyatt Carson3 muaj më parë
  • 👍👍😀🍁

    I Paddle My Own CanoeI Paddle My Own Canoe3 muaj më parë
  • How'd you bend the blade Zack ?

    Del Casale ExcavatingDel Casale Excavating3 muaj më parë
    • @letsdig18 not good ! As you know my machine is 12 and been through hell and my blade isn't bent !! LOL

      Del Casale ExcavatingDel Casale Excavating3 muaj më parë
    • he dropped a log on it LOL

      letsdig18letsdig183 muaj më parë
  • The Price of our Toys go UP the Older we get. Spend the Cash 💰 or Don’t go out to Play. 😬 👍

    Ken S.Ken S.3 muaj më parë
  • Chris.Can the Yanmarhave a Heavier counterweight put on it

    mike seguinmike seguin3 muaj më parë
  • I wonder how the U55 does against the yanmar or even the KX057

    Carlos HernandezCarlos Hernandez3 muaj më parë
    • Would probably be much closer.

      Joe PrinceJoe Prince3 muaj më parë
  • Nice break from work!

    ATV Seat ExchangeATV Seat Exchange3 muaj më parë
  • 7775010405

    Dipak JadhavDipak Jadhav3 muaj më parë
  • Very up lifting video bro, made god viewing. Stay safe

    Ken AllenKen Allen3 muaj më parë
  • Thats what it weighed yesterday.

    K.D. PearceK.D. Pearce3 muaj më parë
  • You need to add a Kubota to your fleet lol

    Todd RobertsTodd Roberts3 muaj më parë
  • Hi Chris Love all your videos. I like both machines but I've seen both of those machines in action on several of our jobs and the Kubota has always been a little more stronger than the Yanmar. I'm sure you've watched Cotontop's videos and his machine is quite impressive. That Rotobec grapple is the way to go if your moving logs and pipe all day. That's an incredible attachment and well worth the money if that's what kind of work you do. Keep up the great work and enjoy the new machine. That's a beauty and Volvo is one strong piece of iron. A friend of mine has over 300 pieces of equipment and he was always a Cat guy. Over 8 years ago he made the change to Volvo and 75 percent of all his construction equipment is Volvo. He has anything from the small ones to the 950. He's a large roadbuilder in the East. Have a great week and have a Great Fourth Of July!!! 🇺🇸🇺🇸🇺🇸

    Stephen LamarreStephen Lamarre3 muaj më parë
  • What about the volvo ecr 58 I would like to see a test

    Marcus PatersonMarcus Paterson3 muaj më parë
  • Hey, Chris when are you going to get back to the big mud job. the one you had to cover the sidewalk with plywood and make a road on top of it?

    Scott KuykendallScott Kuykendall3 muaj më parë
  • The yanmar was designed off the Kubota the guy that came up with yanmar left Kubota and started his own company and designed the from Kubota.

    Anthony YoungAnthony Young3 muaj më parë
    • Yanmar designed and built the first mini excavator

      WPOG84WPOG84Muaj më parë
    • @Todd Reynolds ok whatever I'm not going to argue about it.

      Anthony YoungAnthony Young3 muaj më parë
    • @Anthony Young i think your a little bit off with the info. Kubota srarted as cast iron pipe manufacturer sometime in late 1800s. And yanmar started sometime in. 1920. As a oil lubricated engine manufacturing. And they were not brothers

      Todd ReynoldsTodd Reynolds3 muaj më parë
    • @Todd Reynolds you should go read the history on yanmar. The guy that came up with yanmar is the brother of the guy that owns Kubota.

      Anthony YoungAnthony Young3 muaj më parë
    • I. Dont know about that one. Yanmar is one old company. Made diesel engines long before kubota.

      Todd ReynoldsTodd Reynolds3 muaj më parë
  • I wonder how the bobcat would compare? In the same class

    Jacob BradburnJacob Bradburn3 muaj më parë
  • pressure reliefs are set very similar, both nice pieces of equipment.

    mojo65mojo653 muaj më parë
  • That gal with the bigger butt can handle more weight out front. :)

    TheHillbillyEngineerTheHillbillyEngineer3 muaj më parë
    • Lmao

      Danny SowellDanny Sowell3 muaj më parë
  • Next episode kubota vs pumpkin pie hitachi!

    JasonWorksAlotJasonWorksAlot3 muaj më parë
    • Jason knows best ! Hey buddy.

      Del Casale ExcavatingDel Casale Excavating3 muaj më parë
  • 4280 What you need is tracked Dump trucks for the soft ground that you are working. Something like the MOROOKA - MST3000VD that has a ground pressure per square inch of 3.4 to a maximum loaded of 7.1 compared to your Excavator that has between 8.0 to 5.6 psi of contact pressure.

    Don HansonDon Hanson3 muaj më parë
  • The yanmar is a solid machine for sure. Not saying there's anything wrong with the kubota.

    J BrittJ Britt3 muaj më parë